If you have any questions, contact us at wildcat@wildcatmini.com. Your bike comes 90% assembled and boxed at the factory for shipment.
1) Screw in the pedals. There is a right and left pedal marked R and L on the threaded end. (Right and Left when looking from the rear of the bike). The left pedal has an anti clockwise thread and the right pedal a clockwise thread. Be careful not to cross thread and strip out the crank arm.
2) Clamp and center the handlebar into the stem clamp. Tighten all bolts evenly. Check and tighten the allen head screw at the top of the headset.
3) Insert seat-post into seat tube and tighten seat clamp at the desired height.
4) Be sure that any nuts or bolts that may have come loose during shipping are firm. It is also good policy to make sure your bike is properly adjusted prior to every ride.
5) Recommended tire pressure for general riding is between 30 and 40 psi depending on the weight of the rider.
Some tires will have a maximum of 65 psi, whilst the tires are strong enough to handle this pressure, most riders will only need them inflated to 40psi.
6) Now get out there and shred!
Recommended tire pressure for general riding is between 30 and 40 psi depending on the weight of the rider.
Some tires will have a maximum of 65 psi, whilst the tires are strong enough to handle this pressure, most riders will only need them inflated to 40psi.
Wildcat Mini BMX is the only bmx mini with disc brakes.
If you are trying to adjust the disc brakes, click to view the instructions that will help you get the most out of your Mini BMX.
To install the Gyro Kit, follow these instructions:
Ensure that the threaded portion of the upper adjusting barrel is flush with or slightly protrudes through the bottom of the upper cable stop. Ensure that the threaded portion of the lower adjusting barrel is flush with or slightly protrudes through the top of the lower cable stop. Attach the upper cable to the brake lever. Ensure that the adjusting barrel is fully tightened in the brake lever. Pull the link wire on the rear brake assembly until the brake shoes are touching the rim wall and tighten the brake bolt. The lower cable tension should be tight. Ensure that the brake shoes are positioned as per the diagram. Adjust the tension on the upper cable at the Y junction to ensure that there is sufficient tension on the cable stops to keep the cable ends in place in the rotor unit.
For full instructions on a hi-ten wheel, please click here
For full instructions on a Cross Wheel Setl, please click here
For instructions on changing a Turbo Wheel, please click here
Instructions for changing the tire on a Hi-Ten wheel
Important - deflate tire
If disc brake is present, using a long screwdriver or similar - lever the disc anti-clockwise against hub to get started winding it off
Undo the 5 x eye-bolts holding the hub half together (5mm hex one side, hub tool the other but sometimes not required. A super wide flat head screwdriver also works)
Pull out the non-fixed side of the hub (opposite side to driver) and you should be able to get the tire off.
Swap tube to new tyre ensuring tread direction is correct
Re-assemble
Please check and adjust lock-rings, cranks, pedals etc before and after every ride, all surfaces should be wiped down with CRC or similar to prevent corrosion particularly if the paint or coatings become scratched. Alternatively surfaces can be sprayed with a clear coat for protection. The driver on the rear wheel should be sprayed well with CRC on a monthly basis. Stripped threads, etc due to parts not being tightened may not be covered by warranty.
Please see below for the instructions on how to install the Wildcat Pro Pegs on your Mini BMX.
You may need to use a spark plug extension socket to tighten the nut.
For full instructions on how to assemble a mini bmx one piece crank, please click here
Specification
Many people wonder how much weight will a Mini BMX hold? A Wildcat one piece crank Mini BMX - or an A series - has been tested up to 220lbs, however we recommend these bikes for people up to 175lbs. The three piece crank Wildcat Mini's - or a Pro Series - have been tested on rieders up to 265lbs, however we recommend them for riders up to 220lbs.
Mini BMX bikes can really range in weight.
Keep in mind, the heavier it is, the harder it is to ride.
Wildcat Mini BMX have the lightest Mini BMX's on the market, with the Wildcat Mini Pro Series coming in at 8.9kg or just under 20 lbs.
These Nylon and Aluminum wheels make them stronger, truer and lighter - avoiding many of the pitfalls that people find with cart wheels.
Why shred on an inferior bike when you can shred on a Wildcat.
Wildcat Mini BMX Bikes are made for people aged 4-40.
Children as young as 3 1/2 or 4 can ride a Wildcat Mini BMX - some parents will even add training wheels on the bikes until their child can ride confidently on their own.
And adults up to to 40 or 50 years old can also ride.
Age is no barrier to riding a Wildcat mini bmx bike.
Wildcat BMX mini bikes are specially designed for both kids and adult to shred to their hearts content!
Original 1: This is our base model, a simple send-it-machine built for jumps, park jamming or flat ground tech-tricks.
Original 2: This range is built for more serious park, street and jump riding. All Original 2 Wildcats come with FREE Disc Brakes for a limited time.
Pro Series: The top of the Wildcat range for the most serious and adventurous riders. Includes the Innovative Pro Turbo Wheel and FREE Disc Brakes.
The A series Wildcat's have a one piece crank - tested up to 220lb.
The B series Wildcat's have a three piece crank - tested up to 265lb
Wildcat is the world leader in Mini BMX development. We pioneered the Disc Brake to make stopping easier for those wanting to be able to control their Mini BMX more effectively.
Some Mini's come with a caliper brake, however due to the 'fatness' of the wheel, these brakes have a limited braking ability. We used to use caliper brakes, but developed the disc brake to make it more effective, and ultimately safer.
We get lots of people wanting to try and put Wildcat's disc brake on their Mini Rocker BMX or Fatboy Mini BMX.
Unfortunately the disc brake won't fit on any of the Rocker Mini's - you can't fit the brake on their frame.
There are a number of Fatboy Mini BMX Bikes however that will take a Wildcat Mini Disc Brake, including the following versions:
Use the hashtags: #wildcatmini #wildcatminiusa #wildcatshreds if you'd like the chance for us to share your posts.
General
Please email us on sales@wildcatmini.com or reach out to us on Facebook or Instagram with any questions or comments.
You can also use the link at the bottom of the page.
Our address is 175 Strafford Ave, Suite 200, Wayne, PA, 19087
In the coming months, we will look to sponsor some riders in the USA. We will be looking for riders who have form, can bomb hard, and have a good following. We want to know that you set the pace, and can bomb harder than others around you.
If you'd like to apply to join the Wildcat Mini BMX Dealer Network, please express an interest here and we will email you more information on how you can apply.
Ultimately, it's about quality.
Many department store bikes you see are made from inferior materials - some even have plastic wheels. And a dead giveaway is to look at the welds.
We are the first full strength Mini BMX with 100% specialized design and true BMX bloodline characteristics across the full range.
Many have commented that our bikes are priced similar to 20" BMX's - well, that's because the parts used on a Wildcat have the same characteristics as 20" BMX bikes.
We currently have 3 series of Wildcat BMX to allow you to purchase a lower spec bike at a cheaper price, but for the true professional and stunt rider, we have developed the Pro Series to help you bomb even harder.
Wildcat continually develop the brand to make it lighter and stronger.
The Wildcat Brand has been around since 2015, when it was born in Spain.
However, our MiniBMX factory began producing parts in 2012 for ODM during the initial explosion of the sport. With a professional team of researchers and developers working alongside the REDBULL riders, WILDCAT successfully developed the first generation of ORIGINAL Mini BMX, the first full strength Mini BMX with 100% specialized design and true BMX bloodline characteristics across their full range.
Wildcat then launched in Australia in 2015, and New Zealand in 2017. 2019 it was time for the USA after years of requests from riders.
We are incorporated in Delaware.
Timeline of the Wildcat
To this day Wildcat is the ONLY true Mini BMX brand (to our knowledge!) that owns and operates their own production lines. This allows constant evolution and innovation of their offering, keeping Wildcat well ahead of the competition.
2015 - Wildcat successfully designed and developed professional accessories compatible with full size freestyle BMX use, standards of production and specialized processes.
2016 - Wildcat developed new lighter, stronger and truer heat treated wheel hubs, replacing the inferior cart style wheel still used by some brands today... Also the CNC9t driver and the integrated CNC steering tube.
2017 - Wildcat developed a specialized removable disk brake system.
2018 - the new generation and worlds first aluminum alloy MiniBMX frame was successfully developed alongside the new Turbo wheel. Total bike weight has been reduced to just over 7kg making this the lightest and strongest MiniBMX in existence by a long shot. The new design is an astonishing 3kg lighter than its predecessor.
2019 - Wildcat launches in the USA after incredible demand and request. Along the launch in the USA comes the brand new Pro Series - taking Wildcat to a whole new level of ride.
To read the full story of Wildcat Mini BMX check out our blog post A History of Mini BMX.
Warranty and returns
All frames carry a limited lifetime warranty against manufacturer defects. All parts are warranted for a period of 1 year from date of purchase against any manufacturing defect, all coating is warranted for a period of 3 months from date of purchase. Parts found to be defective will be replaced free of charge. The purchaser is liable for all labor connected with the repair or warranty work.
This Warranty is effective only if: - Your Wildcat Mini BMX is completely and correctly assembled - Your Wildcat Mini BMX is used under normal conditions for its intended purpose - Your Wildcat Mini BMX receives all necessary maintenance and adjustment - Your Wildcat Mini BMX is dried and cleaned after each ride.
This Warranty does not cover normal wear and tear, normal maintenance items, or any damage, failure, or loss that is caused by improper assembly, maintenance, adjustment, storage, or use of the bicycle.
The claimant must be the original owner/purchaser and produce a receipt to prove the date of purchase. Parts found to be defective will be replaced free of charge. The warranty covers unexpected failure or defect of all parts/components that may not be attributed to fair wear and tear or crash damage outside that considered normal use.
This Warranty is effective only if the bike is correctly assembled, the bike is used under normal conditions for its intended purpose and receives all necessary maintenance and adjustments. This Warranty does not cover normal wear and tear, normal maintenance items, or any damage, failure, or loss that is caused by improper assembly, maintenance, adjustment, storage, or use of the bicycle.
This Limited Warranty will be void if the bicycle is ever modified in any way, ridden by more than one person at a time, someone who exceeds the weight guidance or rented. Wildcat US Inc will not be liable for incidental or consequential loss or damage, due directly or indirectly from use of our products.
All our Mini Bikes receive free shipping in the Continental USA.
If your order is less than $100, there will be a small fee to cover the cost of shipping.
All orders are processed within 1-2 business days. Orders are not shipped or delivered on weekends or holidays.
Shipping for Mini BMX Bikes generally takes 2-5 days.
Some parts may take up to 10 days to arrive.
We use ground shipping with either UPS, USPS, FedEx or DHL to send out all BMX Bikes depending on which is the most efficient time and cost to send it.
Due to the size of the Wildcat Mini box, costs to freight next day or next 2 days are cost prohibitive.
2 day shipping has been as high as $160!!!
If you need it urgently, please email us on sales@wildcatmini.com and we can give you a quote to expedite shipping.
Currently we don't ship outside of the USA, except to Canada, as a standard practice. If you live outside of the USA, and want to order a Wildcat, please email us for a quote on sales@wildcatmini.com - we can advise what the shipping cost will be to get to you.
Wildcat Mini BMX USA is not responsible for any customs and taxes applied to your order. All fees imposed during or after shipping are the responsibility of the customer (tariffs, taxes, etc.).
If you live in Singapore, Thailand, Japan, Philippines, Malaysia, South Korea, or Indonesia, please visit https://wildcatbmx.asia
Wildcat Mini BMX USA is predominately an online store.
Our postal address is 175 Strafford Ave, Suite 200, Wayne, PA, 19087.
All of our BMX bikes and most parts are sent direct from our fulfilment centre in Charlotte, NC. The address is 3512 Faith Church Road Indian Trail, NC 28079
Some parts are sent direct from the factory, however most parts are warehoused in our NC Facility.
Ultimately we've done this to save you shipping costs on parts, and shipping times are only 7-10 days
Payment methods
You can pay with all major credit cards on our website, including Apple Pay and Google Pay, or choose one of our Buy Now, Pay Later options including Sezzle, Afterpay or Klarna.
We also accept Paypal.
Yes you can - we have partnerships with Sezzle, Afterpay and Klarna where you can buy now, pay later.
With all platforms, you can pay in installments once you have been approved.
Four payments. Six weeks. Simple.
And no hidden fees. That’s right. None. Zilch. Nada.
Sezzle is a payment solution that empowers you to “Buy Now and Pay Later” with simple, interest-free installment plans. They break down the total cost of your purchase into smaller payments, spread over at least six weeks. As little as 25% is due at the time of the purchase, with the remaining amount spread out over equal installments (typically three), each two weeks apart. No interest or processing fees are charged to you - as long as you pay everything off on time, you only pay for what you ordered!
When you complete a purchase with Sezzle, the merchant ships your product immediately - so you get to enjoy your item before you’re finished paying for it!
Sezzle automates the remaining payments through whichever payment method you have on file, with text and email reminders before each payment is processed. You can always log into your account and change your payment method, and each order can have payments rescheduled twice, with the first one free! Additionally, if you want to pay off your orders early, you can do so at no extra cost.
Yes, provided there is still a balance remaining on the card.
No, you can't reload a gift card.
Yes. A customer can redeem another gift card during checkout.
To check the balance of your gift card, please email sales@wildcatmini.com and we will advise what is remaining on your card.
No, you can't use a gift card to buy another gift card.
Yes, gift cards are applied to the final order total which includes shipping and taxes.
Most discount codes cannot be applied to gift cards. The exception is a product specific discount code where the product is a gift card.
Yes, gift cards are a form of payment.
No. We provide a number of different gift card values, including $10, $20, $25, $50, $100, $150, $200, $250, $300, $350, $400, $500.
However, should you wish to purchase a gift card for a specific amount that is not listed, please contact us and we should be able to set up a specific gift card to the value you wish to use (minimum value $10).
Mini Rockers, or Mini BMX bikes as they really are, do not all have brakes.
Most brands use an inferior Caliper brake which really struggles to grip the tire and stop the bike from rolling.
Wildcat Mini BMX is the only brand to develop a Disc Brake which can be found on all Wildcat Mini Bikes at wildcatmin.com.
We include brakes to make them safer, and our Pro Series P30's also come with a Gyro Kit as standard, to allow you to spin those bars for days!!
So I bought it for my son, 5 year old .very sick bike for him. Handles bars needed to be changed , because he couldn’t grab the brake . Problem solved, next the seat , the dmx style lean back is so umcortable. Had to buy and new seat and stem and put it in . Other then bike bike is cool.
So pleased that your boy is loving his Wildcat Travis and that he's finding his groove. Look forward to seeing what he's up to on it - make sure you tag us in any posts for a chance to be shared #wildcatminiusa
Love the product! Bike is really nice high quality! 5 year old loves it! If there is a negative, it is that the seat angle doesn’t adjust…
Thanks so much Jeremy, so pumped that your 5 year old loves the bike. We do have the pivotal seat on the Pro Series bikes and also as a spare part if he was wanting to upgrade to a pivotal seat. Hope he has many years of sends and shreds.
It’s my son’s bike and he loves it!! Looks killer and performs like it looks. Solid!!
We have been around ALL the brands. And are coming off a Rocker.
This bike is the real deal!!
Thanks so much Kris - so pleased your son loves his Wildcat. I would imagine that he's loving the longer top tube geometry - so much nicer to ride and a lot lighter than what you've had before. Keep up the great sends!!
