Wildcat Mini BMX instructions on installing a one piece crank
One Piece Crank Assembly
Layout of all parts in order from crank arm to 32MM Nut
- Install sprocket to crank arm place keeper pin situated on the crank arm into the hole on the sprocket to keep the sprocket in place.
- Install 2x washers against the sprocket
- Install Securing nut firmly. May require a tap with a screw driver and hammer.
- Install Bearing against the securing nut (Notice position of the bearing).
- Apply grease to the bearing and the seat surface inside the bottom tube.
- Install crank arm through the frame of the bike ensuring the bearing is sitting in the seat.
- Apply grease to 2nd bearing and seat then insert the bearing over crank.
- Install locking nut firmly against bearing
- Install washer onto crank arm. Notice washer has a key in it to secure against the locking nut this helps to stop the crank coming loose.
- Final step install the 32MM Nut firmly against the washer.
